How to Create Your Own Dog Mask – The Basics

In this report we’re going to look at how to create your own dog mask. We’ll cover the basics and then go on to look at some of the more advanced tips and tricks that you can use.

For those who have a dog that likes to bark, and particularly if your dog loves to play in the backyard and other areas of the house, you will need to get them some special dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up that will look a little scary at first, but it is actually quite straightforward. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t just cut a rectangular shape out of the cardboard, so you’ll have to cut around the edge of the mask so that you get something which looks like a cone. The main thing here is to be realistic with what type of paper plate which you’re using.

Then you will have to wrap the cardboard around the edges of the paper plate, making sure that there is a good seal between the two pieces so you can ensure that nothing will leak when you put the mask on. Be sure the edges are cut so the edges aren’t sharp, as this may damage the edges of the mask.

Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making certain it runs smoothly and evenly across the whole mask. You will want to start with one side of the mask , so you can work your way around it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it’s best that you leave about one-third of an inch of paint on the edges so that it runs over the cardboard.

Don’t fret too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it will leave you with a wonderful finished mask to show off to everybody! It’s also a good idea to wash away any excess paint once you’re done, so you don’t end up with smudges or smears on your dog.

Then it is time to paste the mask on your dog’s head. First you will need to be certain that you have a secure fit between the mask https://dogsrecommend.com/dog-mask and your dog’s head. Once you’ve made sure that it is secure, then you may begin to glue the mask on the dog’s face. Take the piece of cardboard that’s used for the foundation of the mask and fold it over. Make certain it’s quite powerful and then use your hands to ensure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds till you’ve got the mask snugged firmly onto the surface of your dog. Don’t make the folds too large or else it could look messy. As soon as you’ve done this, you can then take out the mask and then attach the cardboard ears. And attach the other area of the mask on the dog. Be sure that the ears are flat and make sure that it’s not too short or long as this can cause some problems with the mask slipping off the dog’s face.

If you’re using a dog mask because your pet security, you will need to do some sanding to make certain it’s secure on your dog. You can accomplish this by sanding off any excess paper which might have been eliminated from your mask.

About the Author:


Sorry, the comment form is closed at this time.